Optec, Inc.
199 Smith Street ∙ Lowell, Michigan 49331 ∙ U.S.A.
www.optecinc.com
Page
4
of
29
Revision 10 –8/31/2012
Installing the Drivers
When the device is plugged into the PC for the first time, a driver may need to be
installed. If the PC is connected to the web, the driver will be found, downloaded and
installed by Windows. The driver is also installed in the directory where the Alnitak
application was installed. If you don’t have an internet connection you can navigate to the
CDM folder created by unzipping the CDM zipfile in the applications folder. See Known
Issues in section 3 for more detail.
Windows XP ™ :
If connected to the web, click on the Found New Hardware balloon
Under “…search for software?” select Yes, this time only, and Next. If not connected to
the web, select No, and navigate to the driver included in the Alnitak installation
directory.
Click “Install the software automatically and Next
You should see the following screen
