Opsens OptoMonitor 3 Скачать руководство пользователя страница 85

Страница: 85 / 105

LBL-2008-41-v5 OptoMonitor 3 IFU_en Rev 2021-08

P a g e

In both cases, a text file will be saved on the USB key. This text files contains all the logs and gives insight

on the history of the DU or OU operations. This can help troubleshooting. Once the message “Done!”

appears in the pop-up message, the dump is completed, and the USB drive may be removed.

If the dumping failed, a pop-up window will appear with an error message.

The message can be:

“Make sure the OU is connected”: The OU and DU must be connected in order to dump the OU logs. The

connection can be wireless or via the cable.

“Make sure USB drive is connected”: A USB drive must be inserted in the DU (or through the USB

extension cable) in order to dump the logs.

Adjustable settings

The following table shows the various adjustable settings with their ranges and default values.

SETTINGS MENU

Setting

Range

Default

Содержание OptoMonitor 3










































































































Результаты поиска

Содержание OptoMonitor 3

Отзывы:

Opsens OptoMonitor 3, Инструкция по эксплуатации, Страница: 85 / 105

Результаты поиска

Содержание OptoMonitor 3

Отзывы: