LBL-2008-41-v5 OptoMonitor 3 IFU_en Rev 2021-08
25
|
P a g e
Overview of the DU
The OptoMonitor 3 Display Unit is the OptoMonitor 3 user interface. It displays the system status,
performs pressure averaging, calculates FFR, dPR and displays relevant graphical curves and data. The
DU also has built in speakers that alert the user in various ways (see section 3.6.1).
The Display Unit (OpM3-DU) includes the following items:
1)
OU-DU communication cable (COM if using 10” DU, LAN if using 15” DU)
2)
Plug-in extensions (number varies based on options)
OpSens has made the OpM3-DU available to all customers in two different sizes: small (10“) and
large (15”).
The only difference between the two units is their size and availability of ports. All functions,
explanations, and any other statement regarding the OpM3-DU applies to both sizes of DU; the systems
operate identically.
The smaller DU device (10” screen) accessible ports:
-
One power port
-
One LAN connection
-
One USB driver ports (for USB Key only)
-
One VGA port (for external monitoring)
-
One COM port
Its smaller size makes it lightweight and highly portable. It is the ideal choice for the customer who
wishes to use this device mounted on the bedside.
The DU device (15” screen) accessible ports:
-
One power port
-
Two LAN Connection ports
-
One USB driver ports (for USB Key only)
-
Video output for external monitoring (VGA,
DVI-D or HDMI output depending on DU-15”
model)
Its increased screen size makes data and functions very clear, and the increased number of ports on the
device makes it far more versatile. It is ideal for control room operation.