S E T U P
M E N U
O P T I O N S
55
properly supports 1080p 24Hz, smoother motion can be achieved by enabling
1080p24 Output
for these discs.
x
Auto
(default) – Video encoded at a 24Hz frame rate will be output as 1080p 24Hz if the TV
informs the player that it can support the 1080p24 signal.
x
Forced
– Video encoded at a 24Hz frame rate will be output as 1080p 24Hz without regard to
whether the TV can support the 1080p24 signal or not. This is useful if the TV can actually
support 1080p24 but does not properly state its capability. Please note that if the TV cannot
support 1080p24, selecting this option will result in no video.
x
Off
– Video encoded at a 24Hz frame rate will be converted to 60Hz (NTSC) or 50Hz (PAL)
9.
DVD 24p Conversion
: Allows you to enable 24Hz frame rate conversion for DVD. This option is
only available when
1080p24 Output
is enabled (set to
Auto
or
On
). Many DVDs that originate
from theatrical movies are encoded with a technique called “3:2 telecine” in order to convert the
24 frames per second film to 60Hz video signal. The player can convert the 60Hz video signal
back to 24 frames per second film and output as 1080P/24Hz. Smoother motion may be
achieved by enabling this option, if both the TV and the DVD disc meet the conversion conditions.
The available options are:
x
On
– Converts DVD to 24Hz frame rate when possible. Remember that motion errors may
be observed if the DVD is not suitable for such conversion.
x
Off
(default) – Does not convert DVD to 24Hz frame rate.
11.
12.
HDMI Options
: Configures video options that apply only to the HDMI output. This item contains
a sub-menu with multiple configuration options. Please refer to the
HDMI Options
section on
page 61 of this manual for details of each option.
Display Options:
Configures the options for displaying on-screen information.
x
Subtitle Shift
– Sets the display position for subtitles.
When the
Subtitle Shift
is set at 0 (default), subtitles are displayed at the original position as
specified on the disc. When it is set at a value between 1 and 10, subtitles are shifted up.
When it is set at a value between -1 and -10, subtitles are shifted down.
This feature is helpful for customers using a 2.35:1 “Constant Image Height” video projection
system. Subtitles can be shifted to the active video area so they do not get cut off. You can
also press and hold the
SUBTITLE
button for 3 seconds to activate this selection.
10.
4Kx2K Output
: Allows you to set the 4Kx2K resolution options. This option only applies to the
HDMI output at 4Kx2K resolution.
Auto (default)
– Output 4Kx2K if the resolution is supported by the display and the content is
suitable for 4K up-scaling. The player automatically checks for 4K compatibility of the TV or
projector. If the display is compatible and the content being played has a 24Hz (or 23.976Hz)
frame rate, the player sends 4Kx2K video from its HDMI output terminal; otherwise, the HDMI
video is sent out at 1080p resolution or less depending on the display’s capability.
Forced
– Always output 4Kx2K video format regardless of whether the TV or projector
supports it, or whether the content being played is suitable for 4K up-scaling. You may
experience a black screen (no video output) if the display is not 4K compatible. For content
that has a 50Hz or 60Hz (59.95Hz) frame rate, the output will be 4Kx2K at 25Hz or 30Hz
(29.97Hz), and video quality may not be optimal due to frame rate conversion.
Содержание BDP-103D
Страница 1: ...USER MANUAL READ CAREFULLY BEFORE OPERATION Blu ray Disc Player BDP 103D EU ...
Страница 95: ...V1 0 51978918 ...
Страница 96: ... ...
