Oppo BDP-103D, Руководство пользователя

Страница: 57 / 96

S E T U P M E N U O P T I O N S
53
Video Setup
The Video Setup section of the Setup Menu allows you to configure video output options.
3. 3D Output : Allows you to choose the video output mode for 3D content.
x
Auto – Outputs 3D if supported both by both the disc content and the display. The player
automatically checks for the existence of 3D content on the disc and the 3D compatibility of
the TV or projector. If both criteria are met, the player sends 3D video from its HDMI output
terminals; otherwise, only 2D video is sent out. 3D glasses (which are not sold by OPPO)
are required to enjoy the 3D movie on your TV.
x Off – Always output 2D video format, even when 3D video exists on the disc. This
guarantees the video quality if your TV is not 3D compatible, or if some necessary
components (such as the 3D glasses) are missing.
x Forced – Always output 3D video format for 3D Blu-ray Discs. You may experience a black
screen (no video output) if your TV is not 3D compatible.
1. Picture Adjustment : Adjusts picture control settings. The BDP-103D provides a wide array of
picture controls. Please refer to the Picture Adjustment section on page 57 for details about
each control.
2. Dual HDMI Output : Allows you to select the output mode when both HDMI Output ports are in
use. If only one HDMI Output is active, this selection will not apply.
x
x Dual Display – Send digital audio and video signals to both HDMI Outputs simultaneously.
This setting is only recommended when two HDMI displays are required, since the surround
sound audio signal may be down-mixed to stereo and the original audio quality may be lost.
Split A/V (recommended) – Use HDMI 1 OUT as the dedicated video output port and
HDMI 2 OUT as the dedicated audio output port. This setting will ensure the best possible
picture quality and the highest possible audio resolution.
NOTE
x The player can automatically adjust the resolution of digital audio and video signals depending
on the capabilities of the connected television and receivers.
In Split A/V mode, HDMI 1 OUT has video only with no audio, but HDMI 2 OUT will have audio
and possibly video. This is because HDMI embeds audio into video data so there must always
be a video signal, even if it’s only a blank screen, to carry audio through.
For HDMI 1 OUT, the dedicated Darbee Visual Presence and Silicon Image VRS ClearView
video processors will be used unless
Source Direct is selected, in which case the Darbee and
Silicon Image video processors are bypassed.
ᵰᶂᶶᶵᶰ
-