Therm-App MD User Manual
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------------------------------
Page 15 of
25
6.6
General Settings
◼
Disable Screen Timeout
–
Allows
the device’s
default screen
timeout to be disabled to enable ongoing use of Therm-App® (only
valid when Therm-App® is connected and image is shown).
◼
Gain Limit Mode
-
Therm
-App® is using noise filter by averaging
frames for temporal noise reduction.
◼
Alert Mode Settings
–
Allows you to configure Alert Mode settings.
➢
Action
-
Allows you
to define
Snapshot
,
Video Recording
,
Video
Streaming
,
Vibrate and Play Alert
.
o
Snapshot
- A snapshot is taken every time a measured
temperature is met or above the preset temperature
threshold
o
Video Recording:
Will record video for as long as a
measured temperature is met or above the preset
temperature threshold. (recordings are stored under date
and time file name).
o
Video Streaming:
Will stream to a preset location for as long
as the temperature is met or above the preset temperature
threshold.
o
Vibrate:
Will vibrate every time a measured temperature is
met or above the preset temperature threshold (
This option
is available only for a mobile device
).
o
Play alert:
Plays an audio file alert every time a measured
temperature is met or above the preset temperature
threshold.
Note: for best performances, it is recommended to activate not
more than three alert actions simultaneously.
➢
Advanced Parameters:
o
Detection Duration (Seconds):
Sets how long the object
needs to be in the set field to trigger the alert.
o
Alert Delay (Seconds):
How long Therm-App® should wait to
send consecutive alerts after the first alert is triggered (time
between alerts).
o
Recording Time After Detection
: How long you want to
continue recording after the person or object leaves the
field of view.
o
Object Size:
Sets the minimum size of the object that will
trigger the alert:
(“Small”
-
4x4 pixels, “Medium small”
-
8x8 pixels, “Medium
big”
-
16x16 pixels, or “Big”
- 32x32 pixels).
o
Tone Frequency:
Allows you to select one of five different
alarm tone.
