Opex Model 72 Скачать руководство пользователя страница 19

Страница: 19 / 104

Safety

Model 72™ Operator Manual

OPEX Corporation

2.2.1. Maintenance Safety

Only authorized personnel are permitted to service and maintain the
Model 72.

Stop the Model 72 before attempting to open or remove exterior panels.

Wear personal protective equipment (PPE) that is appropriate to the job being
performed.

Maintain the Model 72 in proper working condition at all times

- When

performing maintenance, service or repairs:

• Maintain the Model 72 according to the scheduled preventive maintenance

procedures provided in this manual.

• Follow applicable service and repair procedures provided in this manual.

Tool safety

- Use and maintain tools properly, according to manufacturer’s

instructions. Remove tools and other loose items from the Model 72 before
applying power.

Do not attempt to move the Model 72 while the power is connected

- Unplug

the Model 72 from the power source first.

WARNING

Unplug the Model 72 from the power source to remove power from the Model
72 for servicing or when moving the Model 72.

Содержание Model 72









































































































Результаты поиска

Содержание Model 72

Отзывы:

Похожие инструкции для Model 72

Бренды по названию

Популярные бренды

Opex Model 72, Руководство оператора

Результаты поиска

Содержание Model 72

Отзывы:

Похожие инструкции для Model 72

Бренды по названию

Популярные бренды