Opex Eagle Remittance Processor, Руководство оператора

Страница: 100 / 108

100
Eagle Operator Manual
OPEX Corporation
B.2. Reunites
Reason Description
Extract bypassed
Gap between two envelopes entering the extractor
is too small for extraction. Envelopes outsorted for
this reason are sent to the extract pit, not the
reunite bin.
Gap too small to
extract
Gap between two envelopes entering the extractor
is too small for extraction. Gap is not small enough
to warrant outsorting an envelope.
Vacuum held
everything
When the extract gate sensor is tripped, but the
extract open sensor is not tripped.
Vacuum held nothing
When the extract open sensor is tripped, but the
extract gate sensor is not tripped.
Everything went on
content path
When the Content TMD sensor is tripped, but the
Envelope TMD sensor is not tripped.
Everything went on
envelope path
When the Envelope TMD sensor is tripped, but the
Content TMD sensor is not tripped.
Content too thin
Content TMD determines contents are too thin to fit
thickness parameters.
Content too thick
Content TMD determines contents are too thick to
fit thickness parameters.
Content thick change
Content TMD determines a thickness change in
contents.
Content thick peak
Content TMD determines a thickness peak in
contents.
Unable to process
content thickness data
Content TMD cannot process thickness data.
Content hangback
Envelope thickness was detected, but not content
thickness, and assumes that the content was left in
the extract area.