Opengear MFC-8322-S, Руководство пользователя

Страница: 13 / 72

MFC-8322-S and MFC-OG3-N User Manual (Iss. 01) Introduction • 1–3
User Interfaces
Your Network Controller Card may include the following interfaces.
DashBoard Control System
The DashBoard Control System enables you to monitor and control openGear frames and cards
from a computer. DashBoard communicates with other cards in the openGear frames through the
Network Controller Cards. The DashBoard software and user manual are available for download
from our website.
For More Information on...
• installing and using DashBoard, refer to the DashBoard User Manual .
• the available menus in DashBoard for your card, refer to the chapter “ DashBoard
Menus ” on page 6-1.
Card-edge Controls
The front-edge of the Network Controller Card feature LED indicators for the power, ethernet
connection, and general communication activity. The Network Controller Card also include DIP
switches for specifying the IP address of the frame.
For More Information on...
• the specific front-edge controls, refer to the applicable chapter in this manual.
SNMP Monitoring and Control
The Network Controller Card can provide optional support for remote monitoring of your
openGear frame and using the Simple Network Management Protocol (SNMP). This protocol is
compatible with many third-party monitoring and control tools.
For More Information on...
• SNMP monitoring and control, refer to the section “ Enabling SNMP Support ” on
page 2-9.
• SNMP controls for your openGear card, refer to the Management Information Base
(MIB) file for your card.