Opengear ACM5000, Руководство пользователя

Страница: 213 / 335

Console Server & Router User Manual
213

Each of the Serial Ports and each of the Hosts connected to the console server which are to be monitored must have
Nagios enabled and any specific Nagios checks configured

Lastly the central/upstream Nagios monitoring host must be configured
10.3.1 Enable Nagios on the console server

Select System: Nagios on the console server Management Console and tick the Nagios service Enabled

Enter the Nagios Host Name that the Console server will be referred to in the Nagios central server
– this will be
generated from local System Name (entered in System: Administration ) if unspecified

In Nagios Host Address enter the IP address or DNS name that the upstream Nagios server will use to reach
the console server
– if unspecified this will default to the first network port’s IP (
Network (1) as entered in System:
IP )

In Nagios Server Address enter the IP address or DNS name that the console server will use to reach the
upstream Nagios monitoring server

Check the Disable SDT Nagios Extensions option if you wish to disable the SDT Connector integration with
your Nagios server at the head end
– this would only be checked if you want to run a vanilla Nagios monitoring

If not, enter the IP address or DNS name the SDT Nagios clients will use to reach the console server in SDT
Gateway Address

When NRPE and NSCA are both enabled, NSCA is preferred method for communicating with the upstream
Nagios server
– check
Prefer NRPE to use NRPE whenever possible (i.e. for all communication except for alerts)