38
SOFTWARE
Note
Make sure the software upgrade file is available before starting the software upgrade.
1.
Click Browse and find the upgrade file.
Note
Do not change the file name, or the system will fail to find the file.
2.
Select the file name from the list under Step 2.
3.
Click Upgrade. The system will check to find the upgrade file, and then start to upload the
upgrade file. The upgrade status bar will display on the page. When it reaches 100%, the
viewer will return to Home page.
4.
Close the internet browser.
5.
Go to the Windows Control Panel and double-click Add or Remove Programs. Locate the
Camera Viewer software on the Currently Installed Programs list and click Remove to
uninstall the previous software version.
6.
Open the internet browser again and log in to the camera. The system will automatically
download the new version of the Camera Viewer software.
PICTURE SETTING
VIDEO MASK
You can use the video mask page to define a privacy mask to keep users from viewing parts of the
image. You can enable up to five privacy masks and choose a color to obscure the live view form
users.
CAMERA SETUP
These are enhanced functions to set Camera Settings under the Advanced section.
IR Function – description
Day / Night Function – set the Day / Night function to automatically transition, or be permanently
set to Day mode or Night mode.
Day / Night Threshold – set the transition sensitivity needed for a specific environment.
Noise Reduction – allows you to set the Noise Reduction levels for the camera.
Profile – allows you to set and save profiles based on different settings.
TV SYSTEM
Set the desired TV mode for your camera. The default setting is NTSC60, which is optimal for
scenes that do not have high contrast.
WDR2 enables WDR mode which is the optimal mode for high contrast scenes.