34918AG
19
SETUP
The Setup menu includes System Settings, Picture Setup, and Streaming Settings.
Note
The Setup menu displays limited setup options. For a complete list of setup options, see the
Advanced
section.
SYSTEM SETTING
Camera Name
Host Name – The Host Name is used to identify the camera on your system. If camera based
Motion Detection is enabled and is set to send alarm message by Mail/FTP, the host name entered
here will display in the alarm message.
Time Zone – Select your time zone.
Time Format – Select your desired time format.
Sync With Computer Time – Select to synchronize the camera date and time with the connected
recorder.
Sync with NTP Server – Manual allows you to define the date and time manually. Network Time
Protocol (NTP) is an alternate way to synchronize your camera’s clock with a NTP server. Specify
the server you wish to synchronize in the NTP Server box. Then select an Update Interval. For
more information about NTP, visit
IP ADDRESS
You can choose to use a fixed IP address or a dynamic IP address
(assigned by a DHCP server or router) for the camera.
Get IP an Address Automatically (DHCP)
The camera comes preconfigured with a fixed IP address,
selecting Get IP address automatically requires a router or DHCP
server to assign an IP address to the camera.
Note
Every network device has a unique Media Access Control (MAC) address that can be used for
identification. The MAC address is located on the bottom of each camera, and on the box label
(OpenEye Network Camera Manager also displays the MAC address for identification). Record
your camera’s MAC address for identification in the future.