18
VIEWER TABS
Live – Monitor video and perform other video related functions.
Setup – Set the camera name, IP address, and define users. This tab also allows you to configure
the camera settings and view streams.
Advanced – Perform advanced setup configurations, like network setup, security, alarms and
maintenance.
Logout – Change user.
LIVE
Full Screen – This will display the live feed in full screen.
Snapshot – Click the button, and a JPEG snapshot will automatically be saved in the appointed
place. The default location is: C:\.’
Note
If you are using Windows Vista or 7, you will need to change the Snapshot location. Windows
UAC does not allow internet programs to write directly to C:\ for security reasons.
Record – Click Record to star recording live video. Click Record again to stop recording video.
Recorded video will be saved automatically to the designated location on the local workstation. The
default location is C:/. This location can be changed in File Location, in the System menu.
Note
If you are using Windows Vista or 7, 8, or 10, you will need to change the video clip location.
Windows UAC does not allow internet programs to write directly to C:\ for security reasons.
Microphone – PC Network Camera Manager Software audio to camera, enables audio through an
audio out on the camera.
Live Audio – Camera to PC Network Camera Manager Software, enables audio if a microphone is
equipped to the camera.
Note
The Microphone and Live Audio functions are only available on enabled cameras. If the camera
is not enabled for these features, an error message will display.