QUICK START GUIDE
This quick start guide provides
only basic information on the
camera’s settings and operation for
initial installation. Please read the
user manual for optimal camera
confi gurations.
Scan the QR code or go to
openeye.net/downloads
Find the latest product
documentation and software.
Copyright ©2021 OpenEye.
All Rights Reserved. Information contained in this
document is subject to change without prior notice.
OpenEye does its best to provide accurate information but
cannot be held responsible for typos or mistakes.
Liberty Lake, WA, USA
509.232.5261
openeye.net
CONNECTIONS
Waterproof Cable
1
1
Thread lock cap
Thread lock cap
44
Rubber “O” ring
Rubber “O” ring
22
Rubber plug
Rubber plug
55
Camera cable
Camera cable
33
RJ45 enclosure
RJ45 enclosure
5
4
3
2
1
2
1
1
RJ-45
RJ-45
For network and PoE connections
For network and PoE connections
22
Power (12vDC)*
Power (12vDC)* Power connection
Power connection
33
Audio I/O
Audio I/O
Ground
Ground
Audio In
Audio In
Audio Out
Audio Out
44
Alarm I/O
Alarm I/O
Ground
Ground
Alarm In
Alarm In
Alarm Out -
Alarm Out -
Alarm Out +
Alarm Out +
3
*12vDC power input port should be plugged when not in use.
4
1
2
1
1
Reset Jumper
Reset Jumper
To restore the camera to factory
To restore the camera to factory
defaults:
defaults:
1. Disconnect power for 30
1. Disconnect power for 30
seconds.
seconds.
2. Reconnect power and wait 30
2. Reconnect power and wait 30
seconds.
seconds.
3. Close the jumper connection with
3. Close the jumper connection with
a proper tool for 20 seconds.
a proper tool for 20 seconds.
22
microSD Card Slot
microSD Card Slot
Supports up to 512GB microSD
Supports up to 512GB microSD
card for Edge storage.
card for Edge storage.
Do not add or remove the microSD
Do not add or remove the microSD
card when the camera is powered
card when the camera is powered
on.
on.
1
4K WDR Outdoor Bullet
OE-C2012B8
37564AC
