30875AE
69
On the audio page, the Administrator can select an audio transmission mode and audio
bit rate.
Audio monitoring and recording laws vary from location to location. It is highly
recommended that you consult your local, state, and federal laws to verify that
you are in compliance before implementing audio recording.
Transmission Mode
Full-duplex (Talk and Listen simultaneously)
– In Full-duplex mode, the local
and remote sites can communicate with each other simultaneously, i.e. both sites
can speak and be heard at the same time.
Half-duplex (Talk or Listen, not at the same time
)
– In Half-duplex mode, the
local/remote site can only talk or listen to the other site at a time.
Simplex (Talk only)
– In Talk only Simplex mode, the local/remote site can only
talk to the other site
Simplex (Listen only)
– The local/remote site can only listen to the other site.
Disable
– Turn off the audio transmission function.
Server Gain Settings
Set the audio input/output gain levels for sound amplification. The audio gain values are
adjustable from 1 to 6
, and will be turned off if ‘Mute’ is selected.
