Opel CORSA 2017, Руководство пользователя

Страница: 117 / 249

Lighting 115
Automatic light control
When the automatic light control
function is switched on, the system
switches between daytime running
lights and headlights automatically
depending on the external lighting
conditions and information given by
the wiper system.
Daytime running light
3
117.
Automatic headlight activation
During poor lighting conditions the
headlights are switched on.
Additionally, headlights are switched
on if the windscreen wipers have
been activated for several wipes.
Tunnel detection
When a tunnel is entered, headlights
are switched on immediately.
High beam
Push to switch from low to high beam.
Push again to deactivate high beam.
High beam assist
The system switches from low beam
to high beam and vice versa to
prevent glaring. Once activated, high
beam assist remains active and
switches high beam on and off
depending on surrounding
conditions. The latest setting of the
high beam assist will remain after the
ignition is switched on again.
Glare-free high beam for Matrix-LED
headlights
3
117.
Activation
The high beam assist can be
activated via the vehicle settings
menu in the Info Display.
On vehicles equipped with the Radio
infotainment system, it is not possible
to alterate the high beam assist
settings.
Info Display
3
107.
High beam is switched on
automatically in dark surroundings at
a speed above 45 km/h. High beam is
switched off at a speed below
35 km/h, but high beam assist
remains active.
The green control indicator
B
illuminates continuously when the
high beam assist is activated, the blue
A
illuminates when high beam is on.
Control indicator
B
3
105,
A
3
105.