Opal ATN062, Руководство пользователя

Страница: 4 / 26

Ⅵ 、
Failure Analysis and Troubleshooting
Failure phenomenon Cause Analysis Remedy
No reaction from product
when depress test button
9V battery may not
installed properly
Installed the 9V battery
with right Battery
polarity
Low battery beep around
every 43 S
Low voltage of 9V
battery
Replace the battery
Ⅶ
. Notice
1. This product is not re-commanded to be installed in humidity, dusty, high temperature place
like Kitchen or bathroom
2. During the installation please make sure that there will be no other obstacle which may cover
the flash light or alarm sound from the smoke alarm.
3. Smoke alarm can not work if the battery is not connected to the right battery polarity, and the
product may also be destroyed because of this.
This marking indicates that this product should not be disposed with other household wastes throughout the
EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle
it responsibly to promote the sustainable reuse of material resources. To return your used device, please
use the return and collection systems or contact the retailer where the product was purchased. They can
take this product for environmental safe recycling.
KÄYTTÖOHJE (FI)
Lue tämä käyttöohje huolella läpi ennen laitteen käyttöä ja säilytä ohje myöhempää
käyttöä varten.
Tämä savuhälytin toimii valosähköilmaisimen avulla. Laite havaitsee savun, kun infrapunasäde
siroaa sensoriin tulevan savun pinnasta. Valosähködiodi ottaa vastaan sironneen valon ja saa
aikaan valosähkösignalin, joka laukaisee hälytyksen.
Ⅰ
.
Muoto ja koko