On-Net Surveillance Systems, Inc.
NetDVR 6.5
Administration
48
Output Settings for [Device Name] [Camera Name] Window
In the
Output Settings for [Device Name] [Camera Name]
window you are able to associate a camera with particular
external outputs, defined in the
, for example the sounding of a siren or the switching on of lights.
The associated outputs can be triggered automatically when motion is detected as well as manually through output
buttons available in NetGuard and NetGuard-EVS.
Access:
You access the
Output Settings for [Device Name] [Camera Name]
window from the
, by clicking the
Outputs...
button.
•
Associating Outputs with Manual Control and Detected
Motion
Note:
Use of features in the
Output Settings for [Device Name] [Camera Name]
window requires that output
has been defined in the
.
You have a high degree of flexibility when associating a camera with particular outputs:
•
You are able to select between all available outputs, i.e. outputs defined as output events for the
camera itself
as well as
outputs defined as output events for other devices on the NetDVR system
•
The same output may be used for manual control
as well as
for automatic triggering when motion is
detected
Selecting Output for Manual Control
You are able to specify outputs to be triggered manually from a list in NetGuard or NetGuard-EVS.
To specify an output for manual triggering in NetGuard/NetGuard-EVS, do the following:
1. Select the required output in the
All Outputs
list in the left side of the
Output Settings for [Device
Name] [Camera Name]
window.
Tip:
When you select an output in the
All Outputs
list, you can view detailed information about
the selected output under
Output Information
in the lower part of the window.
2. Click
the
>>
button located between the
All Outputs
list and the
On Manual Control
list. This will
copy the selected output to the
On Manual Control
list.
An unlimited number of outputs may be selected this way.
