Onset HOBO MX100 Скачать руководство пользователя страница 1

HOBO® MX100 Temp Logger Manual 

20813-J 

The HOBO MX100 Temp logger measures temperature in indoor environments. With an IP67 
environmental rating, the logger can be deployed indoors where moisture may form. This 
Bluetooth® Low Energy (BLE)-enabled logger is designed for wireless communication with a 
phone, tablet, or computer. Using the HOBOconnect® app, you can easily configure the logger 
and then download logged data to view or export it for further analysis. The logger has a built-
in alarm you can configure to trip at thresholds you specify. Designed with a non-replaceable 
lithium battery, this logger also has a power-saving mode that allows you to use the Bluetooth 
signal only when needed to maximize battery life. 

Note:

 This logger is not supported by the 

HOBO MX Gateway. Contact Onset Technical Support for questions on MX100 logger 
compatibility with the gateway. 

Specifications 

Temperature Sensor 

Range 

-30° to 70°C (-22° to 158°F) 

Accuracy 

±1.0°C from -30° to -5°C (±1.8°F from -22° to 23°F) 
±0.5°C from -5° to 50°C (±0.9°F from 23° to 122°F) 
±1.0°C from 50° to 70°C (±1.8°F from 122° to 158°F) 

Resolution 

0.04°C (0.072°F) 

Drift 

<0.01°C (0.018°F) per year 

Response Time 

6 minutes typical to 90% in open air moving 1 m/s, unmounted 

Logger 

 

Logger Operating Range 

-30° to 70°C (-22° to 158°F) 

Radio Power 

1 mW (0 dBm) 

Transmission Range 

Approximately 30.5 m (100 ft) line-of-sight 

Wireless Data Standard 

Bluetooth Low Energy (Bluetooth Smart) 

Logging Rate 

1 second to 18 hours 

Time Accuracy 

±1 minute per month at 25°C (77°F) 

Battery 

CR2450 3V lithium, not replaceable 

Battery Life 

1 year, typical with logging interval of 1 minute and Bluetooth Always On 
enabled; 2 years, typical with logging interval of 1 minute and Bluetooth 
Always On disabled. Faster logging intervals, remaining connected with 
the app, excessive downloads, and paging may impact battery life. 

Memory 

30,000 measurements 

Full Memory Download 
Time 

Approximately 30 seconds; may take longer the farther the device is 
from the logger 

Dimensions 

6.9 x 4.5 x 1.1 cm (2.71 x 1.76 x 0.42 inches) 

Weight 

25.5 g (0.90 oz) 

Environmental Rating 

IP67 

 

The CE Marking identifies this product as complying with all relevant 
directives in the European Union (EU). 

 

 

See last page 

Passed RTCA DO160G, part 21H 

 

 

 

HOBO MX100  
Temp Logger 

Required Items: 

 

HOBOconnect app 

 

Mobile device with 
Bluetooth and iOS, 
iPadOS®, or 
Android™, or a 
Windows computer 
with a native BLE 
adapter or supported 
BLE dongle 

 

 

Содержание HOBO MX100






Отзывы: