AX-ConfigurationUtility User Manual
21
7.
PHY Panel
Figure 5: Physical layer for AXM0F343
1.
Select Carrier Frequency. If more than one channel is configured (see below) the
frequency selected here is that of channel number 0. RFDIV indicates that the VCO
is running at 4 times the LO frequency, rather than 2 times (depending on the
frequency band). This is an indicator only unless you are using an external inductor
and the selected frequency can be reached in both ways (using a different inductor
value, of course).
2.
Symbol rate & Bitrate specify the data rate. The values are identical except when
using Manchester encoding (bitrate = 0.5*symbol rate) or 4-FSK (bitrate =
2*symbol rate).
11.
8.
5.
6.
7.
9.
.
10.
.
12.
2.
.
13.
3.
.
4.
1.
