PRODUCT GUIDE
Micro Bluetooth
®
Stereo
with CD Player and FM Radio
Model: BWA16AA002
CAUTION: To use product properly, please read the user guide completely before initial use.
TM
IMPORTANT SAFETY INSTRUCTIONS
1. Read these Instructions.
2. Keep these Instructions.
3. Heed all Warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding - type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your safety. When the provided plug does
not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer,
or sold with the apparatus. When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
15. Power Sources - This product should be connected to a power supply only of the type described in
these operating instructions, or as marked on the unit.
16. Water and Moisture - This product should be kept away from direct contact with liquids.
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus.
17. CAUTION – Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type. Batteries (a battery pack or an installed battery) shall not be exposes to excessive
heat such as sunshine, fire, etc.
18. Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device
shall remain readily operable.
19. Do not install this equipment in a confined or "boxed-in" space such as a bookcase or similar unit,
and maintain good ventilation conditions. The ventilation should not be impeded by covering the
ventilation openings with items such as newspaper, tablecloths, curtains, etc.
20. This apparatus is for professional use only.
21. When moving or not using the appliance, secure the power cord (e.g., wrap it with a cable tie).
Be careful not to damage the power cord. Before using it again, make sure the power cord has not
been damaged. If the power cord has been damaged at all, bring the unit and cord to a qualified
service technician for repair or replacement as specified by the manufacturer.
22. WARNING: Please refer to any important information (e.g., electrical, safety, etc.) printed on the
exterior bottom enclosure or rear panel before installing or operating the product.
WARNINGS AND PRECAUTIONS
•
CAUTION:
To prevent electric shock, match wide blade of plug to wide slot, fully insert.
•
WARNING:
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
•
CAUTION:
Use of any controls or adjustments or performance of procedures other than those herein
specified may result in hazardous radiation exposure.
•
WARNING:
Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the users authority to operate the equipment.
•
WARNING:
Do not place the unit on top of any soft, porous, or sensitive surfaces to avoid damaging the
surface. Use a protective barrier between the unit and surface to protect the surface.
•
WARNING:
Use of this unit near fluorescent lighting may cause interference regarding use of the
remote. If the unit is displaying erratic behavior move away from any fluorescent lighting, as it may be
the cause.
•
CAUTION:
Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type.
•
WARNING:
The remote control button cell battery contains mercury. Do not put in trash, instead recycle
or dispose of as hazardous waste.
•
WARNING:
Lithium batteries, like all rechargeable batteries are recyclable and should be recycled or
disposed of in normal household waste. Contact your local government for disposal or recycling
practices in your area. They should never be incinerated since they might explode.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ATTENTION
RISQUE D’ ÉLECTROCUTION
NE PAS OUVRIR
DANGEROUS VOLTAGE:
The lightning flash with arrowhead symbol, within an
equilateral triangle is intended to alert the user to the presence of uninsulated dangerous
voltage within the product’s enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
ATTENTION:
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
DANGER:
This product utilizes a Class 1 laser to read Compact Discs. This laser
Compact Disc Player is equipped with safety switches to avoid exposure when the CD
door is open and the safety interlocks are defeated. Invisible laser radiation is present
when the CD Player’s lid is open and the system’s interlock has failed or been defeated.
It is very important that you avoid direct exposure to the laser beam at all times. Please
do not attempt to defeat or bypass the safety switches.
INFORMATION:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
NOTICE:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesired operation.
Programming a CD
Step
1
Follow the steps for “Playing a CD”, then press the STOP button.
Step
2
Press the PROG/REP button on the remote control, “PROGRAM”
and “P-01” will appear on the LCD display, indicating that the unit
is in program mode, and it is ready for the first track to be selected.
Step
3
Press the TUNE/SKIP buttons to select the track as you desire.
Step
4
Press the PROG/REP button to select a track, “P-01” will change
to“P-02”.
Step
5
Repeat steps 3 and 4 until the desired CD tracks are programmed.
Step
6
Press the PLAY/PAUSE button to begin playing the programmed
tracks.
Step
7
If you want to review the programmed tracks, press the PROG/REP
button repeatedly in stop mode.
CD OPERATION
Playing a CD
If this is your first time playing a CD on this unit, remove the cardboard disc
from behind the CD DOOR before attempting to play an actual CD.
Step
1
Press the OPEN AREA to open the CD DOOR.
Step
2
Insert a CD into the unit.
Step
3
Press the POWER button to turn on the unit.
Step
4
Press the SOURCE button to select CD mode, the loaded CD will
begin to play automatically.
Step
5
Press the PROG/REP button on the remote control to select the
play mode as the following sequence:
Normal > Repeat 1 > Repeat all > Random > Normal
• Do not expose the apparatus to dripping or splashing. Do not place objects filled with liquids (e.g., vases)
on top of the apparatus.
• Adapter is used as disconnect device and it should remain readily operable during intended use. In order
to disconnect the apparatus from the mains completely, the adapter should be disconnected form the
mains socket outlet completely.
• Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
• Caution marking is located at the bottom of apparatus.
FOLD
FOLD
FOLD
FOLD
FOLD
FOLD
FOLD
FRONT
FOLD
