4
> Install
> Playback
Troubleshooting | Supplementary Information, etc.
12.SLEEP button: Set the sleep timer. Select from "30
min", "60 min", and "90 min".
13.PHONES jack: Headphones with a standard plug
(Ø1/4"/6.3 mm) are connected.
14.MUSIC OPTIMIZER button: Turns on/off the Music
Optimizer function that provides better sound quality for
compressed audio.
15.HDMI OUT button: Allows you to select the HDMI OUT
jack to output video signals (P16).
16.INFO button: Switches the information on the display
17.SETUP button: You can show advanced setting items
on the TV and display to provide you with an even
better experience. (*)
18.QUICK MENU button: Settings such as "Tone" and
"Level" can be made quickly during play on the TV
screen.
19.Cursor buttons (
S
/
T
/
W
/
X
) and ENTER button:
Select the item with the cursors and press ENTER to
confirm. Use them to tune to stations when using
TUNER (P29).
20.RETURN button: Returns the display to the previous state.
21.DIMMER button: You can adjust the brightness of the
display in three steps. It cannot be turned off
completely.
22.MEMORY button: Used to register AM/FM radio
stations (P30).
23.AUX INPUT HDMI jack: Connect a video camera, etc.,
using a HDMI cable.
24.SETUP MIC jack: The supplied speaker setup
microphone is connected.
25.TUNING MODE button: Switches tuning to an AM/FM
radio station between automatic tuning and manual
tuning (P29).
26.WHOLE HOUSE MODE button: Enables the WHOLE
HOUSE MODE function to play the same source in all
the multi-zone connected rooms. (P32)
Display
1. Speaker/Channel display: Displays the output channel that
corresponds to the selected listening mode.
2. Lights in the following conditions.
Ë
: When headphones are connected.
Z2/Z3: When ZONE 2/ZONE 3 is on.
: When connected by BLUETOOTH.
: When connected by Wi-Fi.
NET: When "NET" is selected with the input selector and the unit is
connected to the network. It will flash if the connection to the network is
not correct.
USB: When "NET" is selected with the input selector and the unit is
connected by USB and the USB device is selected. Flashes if the USB
is not properly connected.
HDMI: When HDMI signals are input and the HDMI input is selected.
DIGITAL: When digital signals are input and the digital input is
selected.
3. Lights according to the type of input digital audio signals and the
listening mode.
4. Lights in the following conditions.
RDS (European and Asian models): Receiving RDS broadcasting.
TUNED: Receiving AM/FM radio.
FM ST: Receiving FM stereo.
SLEEP: When the sleep timer is set.
AUTO STBY: Auto Standby is on. (*)
5. Flashes when muting is on.
6. Displays various information of the input signals. Characters that
cannot be displayed on this unit are replaced with asterisks (
＊
).
0
When playing back software which has been encoded in Dolby
Digital, Dolby Digital Plus and Dolby TrueHD, sometimes you may
see a brief message which will read
"DialogNorm: X dB" (X being a numeric
value). For example, if you see the
following message: "Dial4 dB",
to keep the overall output level at THX
calibrated loudness, just turn down the
volume control by 4 dB.
7. This may light when performing operations
with the "NET" input selector.
(*)You can find details in the Advanced Manual.
Содержание TX-RZ820
Страница 35: ...35 En ...
