18
> Hookup
> Setup > Playback > Part Names
1
ZONE 2
ZONE 2B
MAIN ROOM
(North American models)
(ZONE 2A for North
American models)
(ZONE 2A for North
American models)
1
Speaker cable
if you connect:
ZONE 2 SPEAKER
You can enjoy 2ch audio in the separate room by, for example,
playing a Blu-ray Disc player in the main room (where this unit
is located) and listening to internet radio through the speakers
in the separate room (ZONE 2). This feature is not available if
you have connected the front speakers using Bi-Amping
connection. You can play through a maximum of 5.1 channels
in the main room during ZONE 2 playback. Listening modes
such as Dolby Atmos cannot be selected.
ZONE 2 (ZONE 2A for North American models)
Connect with HDMI IN 1 to 3 if you want to output an
external AV component to ZONE 2. If the AV component
doesn't have an HDMI jack, connect using a digital optical
cable, digital coaxial cable, or analog audio cable. If any
of these are already used, you do not have to connect
using any of the others.
(North American models) ZONE 2B
You can output the same audio as described in ZONE 2A
with another set of speakers to output as ZONE 2B. In this
case, connect speakers with 8 Ω to 16 Ω impedance for
ZONE 2 A/B. These cannot be connected when height
speakers are connected.
Setup
0
Settings are required in Initial Setup, "4. Multi
0
To use the ZONE 2A+B output, set "Zone
Speaker" in "1. AccuEQ Room Calibration" in Initial
Setup to "Zone 2 A + B" (
0
The audio from externally connected AV
components can only be output when the audio is
analog or 2ch PCM audio signals. If you have
connected to this unit with an HDMI cable or digital
optical/coaxial cable, may be necessary to convert
the audio output of the AV component to PCM
output.
