63
≫
≫
≫
≫
≫
≫
5.1.4 Channel ZONE SPEAKER (For North American models only)
ZONE 2
bm
bl
2
1
7
8
9
bk
5
4
6
3
MAIN ROOM
MAIN ROOM:
This is an example of combining the top middle speakers at the front and the rear high speakers at the rear
to the 5.1 Channel System. The height speakers in front can be selected from following 4 types. The height speakers that
can be combined at the rear differ depending on the height speakers used at the front.
❏
Combination example when Top Front Speakers are used at the front (
)
❏
Combination example when Top Middle Speakers are used at the front (
)
❏
Combination example when Front High Speakers are used at the front (
)
❏
Combination example when Dolby Enabled Speakers (Front) are used at the front (
)
ZONE 2:
You can enjoy 2-ch audio in the separate room (ZONE 2) while performing playback in the main room (where
this unit is located). The same source can be played back in the main room and ZONE 2 simultaneously. Also, different
sources can be played back in both rooms.
•
While ZONE 2 playback is being performed, Height 1 speakers installed in the main room cannot play audio.
"Speaker Setup" settings during
Initial Setup (
p181
)
Speaker Setup
Next
Speaker Channels
Subwoofer
Height 1 Speaker
Height 2 Speaker
Zone Speaker
Zone 2 Preout
Bi-Amp
Speaker Impedance
Select how many speakers you have.
5.1.4 ch < >
Yes
Top Middle
Rear High
Zone 2
Zone 2
No
6ohms or above
• Speaker Channels:
5.1.4 ch
•
Subwoofer:
Yes
•
Height 1 Speaker:
Select the
type of height speaker actually
installed.
•
Height 2 Speaker:
Select the
type of height speaker actually
installed.
• Zone Speaker:
Zone 2
• Zone 2 Preout:
Zone 2
•
Bi-Amp:
No
• Speaker Impedance:
Set any
value (
p46
Setup
When video and audio via HDMI
input are output to ZONE 2, set
"1. Input/ Output Assign" - "TV Out /
OSD" - "Zone 2 HDMI" (
to "Use" on the Setup menu.
