Onkyo TX-RZ3400 Скачать руководство пользователя страница 178

Страница: 178 / 205

178

≫

≫

≫

≫

≫

≫

2. Remote ID

Change the remote controller ID.

Setting Item

Default Value

Setting Details

Remote ID

If multiple ONKYO products are installed in the

same room, select the ID for the remote control

used with this unit from "1", "2" and "3" to prevent

interference between the unit and other ONKYO

products. After changing the ID on the main unit,

set the same ID on the remote controller as the

main unit with the following procedure.

While pressing and holding the MODE button,

press the following buttons for approx. 3 seconds.

• To change the remote controller ID to "1":

MOVIE/TV

• To change the remote controller ID to "2": MUSIC

• To change the remote controller ID to "3": GAME

3. Preamp Mode

If speakers are connected to the PRE OUT jacks on this unit via a power

amplifier, you can reduce the power consumed by this unit by turning off the

power supplied to the SPEAKERS terminals you are not using on this unit.

Setting Item

Default Value

Setting Details

Preamp Mode

Select the SPEAKERS terminals whose power you

want to turn off.

"No": Power is supplied to all SPEAKERS

terminals.

Select when a power amplifier is not connected.

"Front": Turns off the power for the SPEAKERS

terminals for the front speakers.

"Front + Center": Turns off the power for the

SPEAKERS terminals for the front speakers and

center speaker.

"All": Turns off the power for all SPEAKERS

terminals. Select when this unit is to be used as the

pre-amplifier.

• This setting cannot be selected when bi-amp

connection is used for speakers.

4. Firmware Update

Change the settings for Firmware Update.

Setting Item

Default Value

Setting Details

Update Notice

Enable

Availability of a firmware update is notified via

network.

"Enable": Notify updates

"Disable": Do not notify updates

Version

The current firmware version is displayed.

Update via

NET

Press ENTER to select when updating the firmware

via network.

• This setting cannot be selected if you do not

have Internet access or there is no updatable

firmware.

Содержание TX-RZ3400













































































































































































































Результаты поиска

Содержание TX-RZ3400

Отзывы:

Похожие инструкции для TX-RZ3400

Бренды по названию

Популярные бренды

Onkyo TX-RZ3400, Инструкция по эксплуатации

Результаты поиска

Содержание TX-RZ3400

Отзывы:

Похожие инструкции для TX-RZ3400

Бренды по названию

Популярные бренды