Onkyo HT-R648, Инструкция по эксплуатации

Страница: 47 / 76

47
En
Tuner
■
AM Freq Step
`
10kHz
`
9kHz:
Select the frequency step according to your area.
For AM tuning to work properly, you must specify the
AM frequency step used in your area. Note that when this
setting is changed, all radio presets will be deleted.
Auto Standby
■
Auto Standby
`
Off
`
On
When “ Auto Standby ” is set to “ On ”, AV receiver will
automatically enter Standby mode if there is no operation
for 30 minutes with no audio and no video signal input.
“
Auto Standby ” will appear on the display and OSD 30
seconds before the Auto Standby comes on.
Note
• With some sources, the Auto Standby function may activate
itself during playback.
• The Auto Standby function does not work when Zone 2 is on.
UP-A1
■
UP-A1 ChargeMode
`
Auto :
Power feeding is interrupted when your iPod/iPhone
is fully charged.
`
On :
Power feeding continues even if your iPod/iPhone is
fully charged.
`
Off :
Your iPod/iPhone is not charged.
You can specify how the power is fed to your iPod/iPhone
when the AV receiver is in Standby Mode.
Note
• This setting cannot be selected when:
– the UP-A1 Dock with docked iPod/iPhone is not connected to
the AV receiver, or
– the docked iPod/iPhone model is not supported.
• When the “ UP-A1 ChargeMode ” setting is set to “ On ”, or to
“ Auto ” with your iPod/iPhone recharging, the SLEEP indicator
is dimly lit in standby mode. In such conditions, the power
consumption of the AV receiver slightly increases.