Onkyo 243989, Инструкция по эксплуатации

Страница: 95 / 121

95
Front Panel ≫ Rear Panel ≫ Remote ≫
Contents
≫
Connections
≫
Playback
≫
Setup
≫
Setting Item Default Value Setting Details
Preset Volume Last You can set the volume beforehand for playing
back the Sonos Connect. Select a value from
"Last" (Volume level before entering standby
mode), "Min", "0.5" to "99.5" and "Max".
• To use this function, set "Input Selector"
beforehand.
• You cannot set a higher value than that of
"
3.
Audio Adjust
"
-
"
Volume
"
-
"
Maximum Volume
"
.
• This function is not effective in ZONE 2.
6. Multi Zone
„
1. Remote Play Zone
Change the settings for remote play.
Setting Item Default Value Setting Details
Remote Play
Zone
Auto When playing with AirPlay or Spotify Connect,
or when using the Music Server function to play
remotely from your PC, you can set whether to play
in the main room (where this unit is located) or in a
separate room (ZONE 2).
"Auto": When the main room input is NET, music is
played in the main room. When the separate room
input is NET and the main room input is other than
NET, then the music is played in the separate room.
"Main", "Zone 2": Select when limiting the play zone
to a particular room. For example, when playing only
in the separate room, select "Zone 2".
• This function may not work if playback is already
proceeding with the same network function.
7. Miscellaneous
„
1. Tuner
Change the settings for Tuner.
Setting Item Default Value Setting Details
AM / FM
Frequency Step
(North American
models)
10 kHz/ 0.2 MHz Select a frequency step to suit your residential
area.
Select "10 kHz/ 0.2 MHz" or "9 kHz/ 0.05 MHz".
• When this setting is changed, all radio presets
are deleted.
FM Search Level
(European
models)
Normal
If automatic tuning regularly stops on FM stations
with weak reception when "Normal" is selected,
select "Strong" so only those FM stations with
strong reception are selected.
DAB Auto Scan
(European
models)
-
You can run the auto scan when new DAB stations
are added or when you move house.
DAB DRC
(European
models)
Off With the DRC (Dynamic Range Control) setting,
you can reduce the dynamic range of DAB digital
radio so that you can still hear quiet parts even
when listening at low volume levels - ideal for
listening to the radio late at night when you don't
want to disturb anyone.
"Off": DRC off
"Large": Large reduction in dynamic range
"Small": Small reduction in dynamic range