Onkyo 243989, Инструкция по эксплуатации

Страница: 12 / 121

12
Front Panel ≫ Rear Panel ≫ Remote ≫
Contents
≫
Connections
≫
Playback
≫
Setup
≫
Display
1. Speaker/Channel display: The currently selected speaker system lights.
2. Lights in the following conditions.
: Headphones are connected.
Z2: ZONE 2 is on.
: Connected by BLUETOOTH.
: Connected by Wi-Fi.
NET: Lights when connected to the network with the "NET" input selector. It
will blink if incorrectly connected to the network.
USB: Lights when the "NET" input selector is selected, a USB device is
connected and the USB input is selected. It will blink if the USB device is not
properly connected.
HDMI: HDMI signals are input and the HDMI input is selected.
DIGITAL: Digital signals are input and the digital input is selected.
A: Audio is output only to SPEAKER A.
B: Audio is output only to SPEAKER B.
AB: Audio is output to both SPEAKER A and SPEAKER B.
3. Lights according to the type of input digital audio signals.
4. Lights in the following conditions.
RDS (European models): Receiving RDS broadcasting.
TUNED: Receiving DAB (European models)/AM (North American models)/FM
radio
FM ST: Receiving FM stereo.
SLEEP: Sleep timer is set. ( p93 )
AUTO STBY: Auto Standby is set. ( p93 )
5. Blinks when muting is on.
6. Displays various information of the input signals.
7. Cursors ( / / / ): These may light when performing operations while
“NET” is selected with the input selector. / light when there are multiple
folders or files that are available to be selected. / light when text
information does not fit with the range provided by “
6
”.
   
 

