background image

This machine will afford you many years of trouble
free operating satisfaction if it is given proper care. All
parts have passed rigid quality control standards
before being assembled to produce the finished prod-
uct. Prior to packaging, the units are again inspected
for assurance of flawless operation. 

This polishing machine was protectively packed to pre-
vent damage in shipment. We recommend that upon
delivery, remove the unit from its pallet and carefully
inspect it for any possible damage in transit. 
If damage is discovered, immediately notify the trans-
portation company that delivered your floor machine.
As a shipper, we are unable to act upon any claim for
concealed damage. You must originate any claim with-
in 5 days of delivery.

These instructions are for your protection and informa-
tion. 

PLEASE READ CAREFULLY!

Failure to follow these

precautions could result in injury or discomfort.

Treat this machine as you would any other high grade
precision made product. Throwing, dropping, unrea-
sonable bumping across thresholds and other misuse
may result in a damaged unit and invalidate the war-
ranty.

SWOOP Manual & Parts List - PN 234656 - Rev C (applicable to previous versions of this model) - Printed in USA 12/10/07

®

P

AGE

1

S

AFETY

, O

PERATION

 M

ANUAL

 & P

ARTS

 L

IST

SWOOP

P

OLISHING

F

LOOR

M

ACHINE

This unit is intended for commercial use. 

S

AVE

T

HESE

I

NSTRUCTIONS

P

LEASE

R

EAD

C

AREFULLY

B

EFORE

O

PERATING

R

EAD

& F

OLLOW

A

LL

I

NSTRUCTIONS

, W

ARNINGS

& C

AUTIONS

B

EFORE

U

SING

T

HIS

P

OLISHING

M

ACHINE

Содержание SWOOP













Отзывы: