1.13 Upgrading the Watch Version and App Version
Update the watch version:
When the watch and mobile phone are normally connected through OnePlus Health App, select
Manage
>
More
>
Device update
on the main page of the app to automatically detect the
version update package. When there is an update package, the device version update prompt
will be displayed on the interface. Tap
Device
update
.
Description
During the update, the watch will automatically break the Bluetooth connection. The
upgrade progress is displayed on the watch interface. Please wait patiently until the
upgrade ends.
1.14 Resetting to Default
Tap the Up key to go to the app list interface, and select
Settings
>
System
>
Reset to default
.
The watch will restore factory settings and all your data will be cleared. Please exercise caution
when performing this operation.
2. App Management
2.1 Message Alert and Deletion
Message Alert
1. When the watch is paired with the OnePlus Health App, tap
Sync phone notifications
on
the management page on the app to enable the function, and enable the app that needs to push
messages.
2. For the status bar of the mobile phone shows that a new message is received, the watch will
vibrate to remind you.
3. You can slide up and down the screen to see the message. The watch stores up to 10 unread
messages. If more messages are received, messages received at the earliest time will be
overwritten in turn. Each message can be displayed on one screen.
Notes
Notice push when the watch is taken off: If you do not wear the watch after starting it, the
mobile phone will also push notices to the watch.
Notice push when the mobile phone lights up: After the watch is started, if the mobile
phone lights up and is unlocked, notices will also be pushed to the watch.
Telegram, WhatsApp, Messenger, Discord and Line support quick message reply
(depending on your actual experience).
If you set the DND mode or do not wear the watch, it will still receive pushed messages
but will not vibrate.
If a new message is received while you are viewing a message, the new message will pop
