7
Mini-Gorilla Owner’s Manual O.A.S. 2010
c
1. Take supplied clips and slide over rim of cyclone making
sure flat part of clip is on the top and hole in clip is aligned
with hole in cyclone rim.
To attach motor to cyclone.
1
2
2. Carefully, with help, lift Fan Blower (It is heavy!) onto top
of cone, aligning holes with clip holes. Put washer over hole,
then put bolt in and tighten carefully. No nut is needed.
Gasket
1A. Peel paper
backing off of gasket
material and attach to
top of cone outside of
clips as shown, making
sure there is no gap
in gasket where ends
meet.
1A
Assembly Instructions for Motor and Cyclone
3. Attach the Magnetic Starter to a
leg with supplied clamps with bolts if
you have the mobile cart or a sturdy
surface if you are wall mounting it.
3
6. Attach filter to plate as shown using the (3) J - Hooks.
Make sure that rubber gasket is tightly and evenly com-
pressed against the collector plate..
4. Plug hole in filter plate with the included plastic plug
from inside of filter as shown.
5. Hook J - Hook over metal lip of filter and secure with
black thumb nut
6
5
4
Clamp Drum top to Dust Drum then attach flex hose to
top of drum with Band Clamp and attach other end to bot-
tom of cone with another band clamp. You may need to
shorten length of flex hose to fit underneath cone.
Attach included 10’ of 5” dia. flex hose to
inlet with band clamp and your system is
ready to go!
