One Tech 2E-2656, Руководство пользователя, Страница: 10 / 20

6.1.1 RS232 Communication
There are two client in software package, on is RFIDDemo3203.exe other is
Netconfig.exe. For RS232 communication device, just open RFIDDemo3203.exe
client.See below.
Please ensure serial port of reader connect with PC, and select correct port in PC, then
select baud rate, then click connect.
6.1.2 TCP/IP Communication
For TCP/IP communication, you need open two client, Netconfig.exe and
RFIDDemo3203.exe. Netconfig.exe to get the IP address and port of connected UHF
reader. You can open it by click broadcast.
1.See blow procedure 1, click broadcast to get the IP of uhf reader.
2.And input the detected IP, but make sure that your pc and the address at the same LAN,
be simple, you can ping the IP, see procedure 2.
3.
Then click “Connect” to connect the reader.