One Stop Systems PE3RR Скачать руководство пользователя страница 65

Страница: 65 / 75

One Stop Systems

PE3RR PCI Expansion| 65

9.3

Frequently Asked Questions (FAQ)

Do I need to install driver / software for OSS on Windows OS?

- NO, driver is not required for OSS when using it on Windows 7 OS and above, Linux and Mac.

Do I need to install driver / software for OSS on Laptop computer running Windows 7, Linux and Mac OS?

- No, driver is not required

Can I plug in the OSS expansion unit to my computer while it is on?

- No, connecting the OSS expansion unit to a powered UP computer can cause the system to lock up or crash

Can I turn off the OSS expansion unit while the computer is running?

- No, if you do this, it will crash your system.

What is the proper sequence of powering ON and powering OFF the expansion system?

- When Powering UP, you must power UP the expansion chassis first then the host computer

- When Powering Down, turn OFF the host computer first then the expansion chassis.

Can I turn on the computer and use it while the expansion chassis is attached?

- You may, but your computer may hang on boot. You need to disconnect the OSS expansion chassis from your host computer

Can I replace the cards in the expansion chassis without powering down the expansion unit and computer?

- No, you must shutdown the computer and expansion unit when removing and installing PCI cards

Do I get the driver for my PCI card from OSS?

- No, check with the vendor or manufacturer of the PCI card.

Can I use an adapter like an express card-to-pcmcia card to connect the OSS to laptop?

- No, using an adapter like express card-to-pcmcia card or vice versa is not going to work with the OSS expansion unit. The OSS hardware will
not be detected or recognized.

10.

My PCIe host card is only showing two green LEDs after powering up the host computer, do I have a bad Host card ?

Содержание PE3RR












































































Результаты поиска

Содержание PE3RR

Отзывы:

Похожие инструкции для PE3RR

Бренды по названию

Популярные бренды

One Stop Systems PE3RR, Руководство пользователя

Результаты поиска

Содержание PE3RR

Отзывы:

Похожие инструкции для PE3RR

Бренды по названию

Популярные бренды