One Stop Systems OSS-PCIe-HIB25-X8, Руководство по установке

Страница: 16 / 23

One Stop Systems
OSS-PCIe-HIB25x8| 16
2.3 Install HIB Target card
Do not plug in the target card while expansion unit or the expansion backplane is ON as this can damage the board. Turn OFF
the unit first before installing the card.
The HIB Target card will only work in the OSS backplane designated “Upstream” slot. It will not function in the downstream
slot or the end-point slot of the backplane.
Install the Target card in the OSS expansion backplane. Plug-in the target card in the designated Upstream slot of the backplane.
Photos below are different backplanes showing where the location of the Upstream slot.