One Stop Systems
ExpressBox 16 Smart | 54
4.16 Configure Network Setting
Configure your computer’s network setting to correlate to the default IP address of the OSS chassis . The IP address of the OSS chassis is
192.168.1.10
Set your network settings to configure manually and enter an IP address for your computer of
192.168.1.20
where 20 can really be any free
number other than 10. To verify we have successfully detected the OSS Expansion chassis on our network open your web browser and direct it
to the IP address of the chassis that is
192.168.1.10
.
4.16.1 How to configure your network setting in Windows OS
This setting is applicable to Windows 7, 8 and Windows server.
You need to disconnect your laptop or desktop computer prior to setting up the Network adapter.
1.
Go to your computer
2.
Right click the " network icon" below the system tray
3.
Click "Open Network & Sharing Center"
4.
Click Local Area Network
5.
Click Properties
a.
Select "Internet Protocol Version 4 (TCP/IPV4)
b.
Click Properties
6.
Select "Use the following IP address"
a.
For IP address enter 192.168.1.20
b.
For Subnet mask enter 255.255.255.0
7.
Click OK
Содержание EB16-SX8
