B
Standardized warning statements
for AC systems
The following statements are industry standard warnings, provided to warn the user of
situations which have the potential for bodily injury. Should you have questions or
experience difficulty, contact One Identity technical support for assistance. Only certified
technicians should attempt to install or configure components.
Read this appendix in its entirety BEFORE installing or configuring components in the One
Identity Safeguard for Privileged Passwords 2000 Appliance.
NOTE:
These warning statements are also available in multiple languages on the One
Identity support site:
https://support.oneidentity.com/one-identity-safeguard/2.0/technical-documents
.
Warning definition
WARNING:
This warning symbol means danger. You are in a situation that
could cause bodily injury. Before you work on any equipment, be aware of
the hazards involved with electrical circuitry and be familiar with
standard practices for preventing accidents.
Installation instructions
WARNING:
Read the installation instructions before connecting the system
to the power source.
Circuit Breaker
WARNING:
This product relies on the building's installation for short-
circuit (overcurrent) protection. Ensure that the protective device is rated
not greater than: 250 V, 20 A.
Safeguard for Privileged Passwords Appliance Setup Guide
Standardized warning statements for AC systems
17
