Find your TV
brand on the
reverse side
of these
instructions. The most
popular codes are listed first.
Write your codes here:
"Universal TV Remote"
Step 1:
Step 2:
Thank you for purchasing the
One For All
®
1 Device universal
remote control. Before you can
use your new remote control,
you will need to program it.
To do this, you need to tell the
remote control what TV set
you wish to operate. This is
done by following these easy
steps.
Step 1:
Install two (2) new AAA
batteries.
Step 2:
Find the code for your
TV on the reverse side of
these instructions.
Step 3:
Enter the code.
Step 4:
Use your remote.
Overview
:
Device
1
Feature and Function
Power
Key
Red Light
(LED)
Channel
& Volume
Keys
Mute
Key
Installing the Batteries
Your One For All
®
1 Device needs
two (2) new AAA alkaline batteries.
To install the batteries:
On the back of
the One For All
®
1 Device , unscrew
and push down on
the tab and lift the
cover off.
1
3
POWER
4
Test the unit by
pressing POWER.
The red light
should blink.
Even if your batteries die, the One For
All
®
1 Device built in memory back-up
will save your programmed setup
codes. The One For All
®
1 Device will
also retain the memory for another 10
minutes once you have removed the
batteries to replace them.
Press the battery
cover back into
place and replace
the screw.
Match the
batteries to the +
and - marks inside
the battery case,
then insert the
batteries.
2
Set-Up Codes
RCA
3124
Sony
1111
1
Looking Up Your TV Code
Look at your TV to find
the brand name and write
it in the space below:
_____________________
2
You will need one of these codes
to program your One For All
®
1
Device remote control.
Step 3:
Setting Up Your TV
1
Turn on your TV.
2
Press and hold
SETUP
until the One For All
®
1 Device's red light
blinks twice. Release
SETUP
.
3
Using the example
shown on the right,
enter the first four-digit
code you wrote down.
(See "Looking Up Your
TV Code".) If you put
in the code correctly,
the red light will blink
twice.
SETUP
How to Enter Codes
If your TV Press
code is:
3
VOL
1
CH
_
4
1
2
4
Aim the One For All
®
1 Device at your TV and press
POWER
.
Your TV should turn off. If it doesn't, repeat Steps 2-4, trying
each code listed for your brand until you find the one that operates
your TV.
4
POWER
Setup
Key
CH+
3
VOL
2
