background image

2

3b

3a

1

3.  Press the 

CH ^

 key once per second until the 

TV turns off. 

4.  When the TV turns off, press 

ON/OFF

 key. 

 

If the TV turns on

:  

press 

MUTE

 to save the TV code. 

 

If the TV does not turn on

:  

press 

CH v

 to go to the previous TV code and 

press 

MUTE

 to save once the TV turns on. 

 

NOTE: There are over 200 possible codes, so 
the code search may take a few minutes. 

Reprogramming Favorite Channel Keys 

The Kid’s Remote comes pre-programmed with 8 
DIRECTV kids channels assigned to the logo keys. 
The pre-programmed keys can be programmed 
to new channels by following the steps below. 

CAUTION: This will program over the channel 
that was pre-programmed at the factory.

 

To program a favorite channel: 

1.  While in Programming mode, press and hold 

the key that you wish to assign a favorite 
channel. The LED blinks twice. Release the key. 

2.  Press the digits for the channel number for 

the favorite channel that you wish to add. 

3.  Press and hold the key that you wish to 

assign again until the LED blinks twice. 

4.  Repeat steps above to assign another favorite 

channel. 

 

If the LED flashes one long blink, the entry 
failed and must be repeated. 

Note: The Kid’s Remote package comes with 
stickers you can use to place over any keys you’ve 
reprogrammed. Label the sticker first; then peel 
it off the sheet and place it on top of the key.

Changing Power Control Settings 

The 

ON/OFF

 key has a default setting to control 

power on both the DIRECTV receiver (or cable 
box if reprogrammed) and TV each time it is 
pressed. To change this power control setting: 

1.  In CHILD or ADULT mode, hold down both 

MUTE

 and 

ON/OFF

 for three seconds, until 

the LED blinks twice. 

2.  Enter 

9 9 5

. The LED blinks twice. 

3.  Press 

ON/OFF

4.  Decide what you want the ON/OFF key to 

turn on and off and in what order. Then press 
the correct key from the following chart.

ON/OFF turns on/off...

...press:

satellite receiver and TV 
(satellite receiver first)

0

satellite receiver and TV (TV 
first)

1

satellite receiver only

2

TV only

3

 

5.  Press and hold 

MUTE

 until the LED blinks twice. 

Отзывы: