Once AgriShift LCL-0.2-120V, Инструкция по установке и эксплуатации

Страница: 7 / 40

AgriShift
®
Lighting Control Unit MASTER - Model LCL-0.2
5
SE
CT
IO
N
2
2 INSTALLATION, COMMISSIONING AND OPERATION
2.1 TECHNICAL ASSISTANCE
Technical assistance on the unit can be obtained from your distributor.
2.2 SAFETY
All technical staff performing operations on a controller must have read and
understood this manual and accepted the recommendations herein.
Before controller commissioning, all connections must be
checked. All electrical wiring and connections should be
inspected for possible defects. The controller should not be
operated if any of its components (whichever it is) appears
defective. Repair or replacement of a defective component
must only be carried out by technical personnel trained for
this purpose. The competence of the technical personnel
must first be confirmed and accepted by your distributor.
2.3 USAGE AND APPLICATION
The LCL-0.2-120V and LCL-0.2-240V controllers are designed to control
dimmable lighting systems used in agricultural farm buildings. Any other
use of these controllers can compromise the safety of the users as well as the
integrity of the system itself. Therefore, such usage is prohibited.
Placing manual switches in the "OFF" position does NOT
disconnect the controller from its electrical network. It is
important to install a main disconnect mechanism to cut
power to the controller completely. Using this main discon-
nect, ensure to cut all power to the system before servicing
the unit or any equipment connected to the unit. Another
option is to cut the main power feeding the controller and
all equipment connected to the controller.
Failure to follow instructions may result in the full or partial cancellation of
the warranty.
The LCL-0.2-120V AgriShift
®
is intended for 120V, single
phase operation only. The LCL-0.2-240V AgriShift
®
is inten-
ded for 240V, single phase operation only.
Both A and B outputs must be on the same phase.