©
Semiconductor Components Industries, LLC, 2014
February, 2014
−
Rev. 0
1
Publication Order Number:
EVBUM2228/D
NCP6925EVK
7 Channel PMIC with
2DCDC Converters, 5 LDOs
and a Triple Input 10 bits
ADC Evaluation Kit Manual
The NCP6925EVK evaluation kit is a full assembled
circuit board for evaluation and test of the NCP6925. This
document provides documentation, test procedure and
equipment set-up for the complete evaluation of the
NCP6925. The NCP6925EVK comes with one NCP6925
evaluation board, 1 MCU board for I
2
C master and
associated cables.
General Description
The NCP6925 integrated circuit is part of the
ON Semiconductor mini power management IC family
(PMIC). It is optimized to supply battery powered portable
application sub-systems such as camera function,
microprocessors. This device integrates 2 high efficiency
1 A step-down DC-DC converters, 5 low dropout (LDO)
voltage regulators and a triple input 10 bits ADC in a
WLCSP36 2.4 x 2.4 mm package.
Features
•
2 DC
−
DC Converters (3 MHz, 1
m
H / 10
m
F, 1 A)
♦
Peak Efficiency 95%
♦
Programmable Output Voltage from 0.6 V to 3.3 V
by 12.5 mV Steps
•
5 Low Noise – Low Dropout Regulators (2.2
m
F,
300 mA)
♦
Programmable Output Voltage from 0.8 V to 3.5 V
by 25 mV Steps
•
Triple Input 10 bits ADC
♦
Dual Resistors Measurement Mode
♦
General Purpose Mode
•
Control
♦
Fully Programmable Through a 400 kHz / 3.4 MHz
I
2
C with Pins Selectable I
2
C Address and Interrupt
Output
♦
Power on Input and General Purpose I/O Pins that
can be used as DC
−
DC Enable Pins
•
Very Low Quiescent Current at No Load
•
Small Footprint : 2.4 x 2.4 mm WLCSP 0.4 mm Pitch
Figure 1. Evaluation Board Picture
http://onsemi.com
EVALUATION KIT MANUAL
