ON Semiconductor MT9V032C12STMH-GEVB, Руководство пользователя

Страница: 3 / 5

MT9V032C12STMH − GEVB
www.onsemi.com
3
Jumper Pin Locations
The jumpers on headboards start with Pin 1 on the leftmost
side of the pin. Grouped jumpers increase in pin size with each
jumper added.
Figure 5. Pin Locations for a Single Jumper. Pin 1 is Located at the Leftmost Side
and Increases as it Moves to the Right
Pin 1
Pins 1 − 4
Figure 6. Address Switch Locations in their Default Positions. The first Switch(ADR0)
and the second Switch (ADR1) of SW3 are set to ON
ADR1
ADR0
Figure 7. Switch Descriptions od Switch SW4 in their Default Positions.The first Switch (STDBY)
is Set OFF while the Second Switch (OE_N) is Set to ON
OE_N
STDBY
Jumper/Header Functions & Default Positions
Table 1. JUMPERS AND HEADERS
Jumper/Header No. Jumper/Header Name Pins Description
J1 Config. Open (Default) Connects to various sensor’s settings
J3 EXTCLK Open (Default) For connection to external clock
J4 +3V3_VDD 1 − 2 (Default) Connects to on-board +3V3_VDD power supply
Open External power supply connection
J5 +3V3_VAA 1 − 2 (Default) Connects to on-board +3V3_VAA power supply
Open External power supply connection
SW1 RESET N/A When pushed, 400 ms reset signal will be sent to MT9V032
SW2 STDBY/OE_N STDBY Off
(Default)
EEPROM Address set to 0xA8
STDBY On EEPROM Address set to 0xAC
OE_N On
(Default)
EEPROM Address set to 0xA4
OE_N Off EEPROM Address set to 0xA0