©
Semiconductor Components Industries, LLC, 2012
April, 2012
−
Rev. 0
1
Publication Order Number:
EVBUM2101/D
DLT100AGEVB
ON Semiconductor Dynamic
Load Tool Evaluation Board
User's Quick Step Guide
What you will need to use the DLT
•
Multichannel Oscilloscope
•
12 V/600 mA Power Supply with Cables to Connect to
DLT
•
Adjustable Voltage and Switching Frequency Square
Wave (Function) Generator
•
Two Differential Scope Probes or One Differential
Probe and 50
W
Terminated Passive Probe
•
Coax Cable to Attach Function Generator to Scope’s
External Trigger
•
Small Screwdriver to Adjust Trimmer Pots
Attaching the DLT to your circuit
•
Make the Connection to Your Board As Close As
Possible to Where-your Actual Load Will Be Placed
•
Make the Connections to Your Board As Short As
Possible. Any Added Wire Between the DLT and the
Circuit Under Test Will Increase Inductance and
Reduce the di/dt Capability of the DLT
•
Observe the Polarity of the DLT’s Connection Tabs
http://onsemi.com
EVAL BOARD USER’S MANUAL
