ON Semiconductor AR1331CP, Руководство пользователя

Страница: 3 / 5

AR1331CPSF32SMFAH3 − GEVB
www.onsemi.com
3
Jumper Pin Locations
The jumpers on headboards start with Pin 1 on the
leftmost side of the pin. Grouped jumpers increase in pin
size with each jumper added.
Figure 5. Pin Locations for a Single Jumper. Pin 1 is Located at the Leftmost Side
and Increases as it Moves to the Right
Pins 1 − 4 Pin 1
Figure 6. Pin Locations and Assignments of Grouped Jumpers.
Pin 1 is Located at the Top-Left Corner and Increases in a Zigzag Fashion Shown in the Picture
Pins 1 and 2 Pin 1
Pins 3 and 4
Pins 5 and 6
Pins 7 and 8
Pins 9 and 10
Jumper/Header Functions & Default Positions
Table 1. JUMPERS AND HEADERS
Jumper/Header No. Jumper/Header Name Pins Description
P1 +VPP1 Open (Default) Connection to ExVPP Power Supply (for OTPM)
P2 +AF_VCM Open (Default) Connection to ExAF_VCM Power Supply
P3 TEST 2 − 3 (Default) Set to Normal Mode
1 − 2 Set to Test Mode
P4 ATEST1
1 − 2 (Default) Normal Operation
2 − 3 Test Operation
P5 FLASH 1 +5V0
2 GND
3 FLASH
4 +3V3
P6 GPI2
1 − 2 (Default) SADDR Operation
Open Trigger Signal for Slave Mode
P7 SHUTTER Open (Default) For Connection to External Shutter
P8 GPI3
2 − 3 (Default) Normal Operation/Master in Multi-camera Mode
Open Slave in Multi-camera Mode
P9 +VPP2 Open (Default) For Connection to ExVPP Power Supply
(for OTPM)
P10 +1V2_VDDPLL 1 − 2 (Default) Connects to On-board +1V2_VDDPLL Power Supply
2 − 3 Connects to On-board +VDD_REG Power Supply
2 − 4 External Power Supply Connection