ON Semiconductor AR0132AT6G00XPEAH3-GEVB, Руководство пользователя

Страница: 3 / 5

AR0132AT6G00XPEAH3 − GEVB
www.onsemi.com
3
Jumper Pin Locations
The jumpers on headboards start with Pin 1 on the
leftmost side of the pin. Grouped jumpers increase in pin
size with each jumper added.
Figure 5. Pin Locations for a Single Jumper. Pin 1 is Located at the Leftmost Side
and Increases as it Moves to the Right
Pins 1 − 4 Pin 1
Figure 6. Pin Locations and Assignments of Grouped Jumpers.
Pin 1 is Located at the Top-Left Corner and Increases in a Zigzag Fashion Shown in the Picture
Pins 1 and 2 Pin 1
Pins 3 and 4
Pins 5 and 6
Pins 7 and 8
Pins 9 and 10
Jumper/Header Functions & Default Positions
Table 1. JUMPERS AND HEADERS
Jumper/Header No. Jumper/Header Name Pins Description
P3 VPP Open OTPM Programming Voltage Not Supplied
P4 SADDR 2 − 3 (Default) I
2
C Address Set to 0x20
1 − 2 I
2
C Address Set to 0x30
P5 TEST 2 − 3 (Default) Set to Normal Mode
Open Set to Test Mode
P6 OE_N
2 − 3 (Default) Parallel Output Enabled
Open Parallel Output Disabled; HiSPi Output Enabled
P7 FLASH 1 +5V0
2 GND
3 FLASH
4 +3V3
P8 STANDBY 2 − 3 (Default) Normal Mode
1 − 2 Standby Mode
P14 ATEST 1 − 2 (Default) ATEST
→
GND
P16 VDD_IO
1 − 2 (Default) 1.8 V Operation of Sensor
2 − 3 2.8 V Operation of Sensor
P18 HiSPi Mode 1 − 2 (Default) SLVS Mode
2 − 3 Hi-VCM Mode