©
Semiconductor Components Industries, LLC, 2015
November, 2015
−
Rev. 0
1
Publication Order Number:
EVBUM2331/D
AP1302CSSL00SMGAH-GEVB
AP1302CS Evaluation Board
User's Manual
Evaluation Board Overview
The evaluation boards are designed to demonstrate the features of
image sensors products from ON Semiconductor. This headboard is
intended to plug directly into the Demo 3 system. Test points and
jumpers on the board provide access to the clock, I/Os, and other
miscellaneous signals.
Features
•
Clock Input
♦
Default – 27 MHz Crystal Oscillator
♦
Optional Demo 3 Controlled MClk
•
Two Wire Serial Interface
♦
Selectable Base Address
•
Parallel Interface
•
MIPI Interface
•
ROHS Compliant
Block Diagram
Figure 2. Block Diagram of AP1302CSSL00SMGAH
−
GEVB
Power Regulators
AP1302
(ICP3)
Sensor
Connector
Host Connector DEMO3
or
DEMO2x (with Adapter)
Power
JACK
Push
Button
Reset
I
2
C Select
Jumpers
SPI_FLASH
ICP3 is Master
Level
T
rans.
RESET_FROM_HOST
SPI (Host is Master)
HOST MIPI
H_CLK, H_D0, H_D1, H_D2, H_D3
MCLK
STAND_BY
SELECT
POWER +5V
0R
DISABLED
GPIO[11:0]
HOST I
2
C
RESET
+1V2
+1V8HEADB
+1V8
Power Supplies (+3.3 V, +2.8 V, + 1.8 V HEADB, +1.2 V)
IOVDD_HMTSC (+1.8 V HEADB) First then
after 200
m
s the Reset of IOVDD
PRIMARY SENSOR MIPI
S0_CLK, S0_D0, S0_D1, S0_D2
SECONDARY SENSOR MIPI
S1_CLK, S1_D0, S1_D1
MUX SENSOR MIPI
S01_D32
SECONDARY I
2
C MASTER
PRIMARY I
2
C MASTER
EVAL BOARD USER’S MANUAL
Figure 1. AP1302CS Evaluation Board
