Initializing Settings Data
124
ZX2 User’s Manual
INTRODUCTION
MAIN
APPLICATIONS
& SETTING
METHODS
SPECIFI-
CATIONS
INDEX
SETTING
TRANSITION
CHARTS
DETAILED
SETTINGS
FLOW OF
OPERATION
CONTENTS
PREPARATION
FOR
MEASUREMENT
BASIC
SETUP
TROUBLE-
SHOOTING
Height
Double
Sheet
Detection
Positioning
Eccentricity
and Surface
Deflection
Steps
and
Warpage
Thickness
Procedure for initializing settings data
• When connecting two or more Amplifier Units, use CH1 to perform initialization because CH2
and later channels cannot be used to do this.
Note that CH2 and later channels are initialized together with CH1.
1
Set to the MENU mode
2
Setting data initialization
Button
Operation
Display
Description of Operation
Explanation of
Selection Menu
Hold down the
button for
three seconds to switch to the
MENU mode.
Button
Operation
Display
Description of Operation
Explanation of
Selection Menu
Press the button to display
.
Press the button to display
.
Displayed
1 digit at a time
Press the
button.
When
is displayed, this
means that initialization is
completed.
Setting data initialization
2
Return to RUN mode
3
Set to the MENU mode
1
Setting completed
Important
Hold down for
3 seconds
Lit
Press to display
.
Press to display.
Hold down