manualshive.com logo in svg

Omron ZW-C1*AT, Руководство пользователя

Поделиться
Скачать
Omron ZW-C1*AT Скачать руководство пользователя страница 81

Setting Sensing

ZW User's Manual

79

 4 

Settings for 

Func

tion

Setting Exposure Time Control Mode

Set the exposure time control mode and exposure time (maximum) or exposure time (fixed).

Exposure time and measuring cycle

• For the "AUTO" exposure time control mode, the measuring cycle is twice the preset exposure time upper limit. (The 

measuring cycle remains the same even if the actual exposure time is the upper limit or less.)

• For the "MANUAL" exposure time control mode, the measuring cycle twice the exposure time is used.

• If the exposure time is 250 

s or less, the measuring cycle is set to 500 

s.

 Explorer pane

: [Bank] | [(Bank Data Name)] (double click)

 Edit pane

: [Sensing setting] icon (

)

 Sensing settings window : [Measurement area 1] or [Measurement area 2] - [Exposure time]

Item

Setting item

Setting value

Description

Exposure time

Exposure mode

Auto (default value)

Automatically sets the exposure time within the range that 
does not exceed the specified upper limit. Usually, select 
this setting.

Manual

Select this mode when you want to specify the exposure 
time, and set the exposure time (fixed value).

Exposure time 
(maximum)

1 to 1,000 (default value) to 5,000 
[

s]

Set the upper limit value of the exposure time when 
[Automatic] has been selected for the control mode.

Exposure time 
(fixed)

1 to 1,000 (default value) to 5,000 
[

s]

Set the fixed value of the exposure time when [Fixed] has 
been selected for the control mode.

Control edge

1 surface/2 surfaces/3 surfaces/
4 surfaces/Peak (default value)

Select the measurement surface target for light adjustment.
The peak is the surface of all measurement surfaces having 
the highest received light amount.

1

Select the exposure mode from [Exposure 

mode].

2

Set [Exposure time (maximum)] and [Control 

edge].

The exposure time control mode can also be set by the operating keys on the Sensor Controller.

 

Setting Exposure Time Control Mode p.304

Important

Note

Содержание ZW-C1*AT



































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды