Omron ZW-7000 Series, Руководство пользователя

Страница: 255 / 336

Setting the Output Conditions ZW-8000/7000/5000
User's Manual
253
7
Senso
r con
trol
ler
ope
ra
ti
ons
Performing Hold with a Key Input
Press the / key on the Sensor Controller to enable the TIMING or RESET input.
• TIMING input is ON while the key is pressed.
•
• RESET input is ON when the key is pressed.
Note that the key input is disabled in the default setting. Set the following when using this function.
Steps Key operation Display Description
1 Press and hold the key for two seconds or more to enter the
FUNC mode.
To save the setting, refer to "7-3 Functions of Operating Keys"
(p.222).
2 Press the / keys to select “SYSTEM” and press the
key.
3 Press the / keys to select “KEY.IN” and press the
key.
4 Enable the key input.
The current setting value is displayed on the sub-display.
Press / key to enter editing mode and the sub-display blinks.
Select “ON” and press the key.
5 Press and hold the key for two seconds or more to enter the
RUN mode.
To save the setting, refer to "7-3 Functions of Operating Keys"
(p.222).
The above settings are also possible using the personal computer tools.
Performing Hold with a Key Input p.166
Note