Omron ZW-7000 Series Скачать руководство пользователя страница 198

Страница: 198 / 336

Printing the contents of settings

196

ZW-8000/7000/5000

User's Manual

5-4 Printing the contents of settings

You can print the contents of bank data and system data settings.



Multi view Explore

: [Device Group] | [(Sensor Name)] (right-click)

Only the expanded parameters are printed.

Item

Setting item

Mode

Description

Target data

All information

The sensor information, bank group data, and system data are all
printed.

Sensor information

The sensor information is printed.

Bank Group

The bank group data (Banks 1 through 8) is printed.

Bank Data

The specified bank data is printed.

System Data

The system data is printed.

Bank number

1 to 8

If bank data is selected as target data, specify the bank number to
print the data for.

Select [Print].

The [Print] window is displayed on the Edit pane.

Select the data to print.

From [Target data], select the data to print.

Select and expand the parameters to print.

If you click [Expand All], all the parameters are

expanded.

To print the default values as well, check the

[Display Default Values] checkbox.

Important

Содержание ZW-7000 Series

















































































































































































































































































































































Результаты поиска

Содержание ZW-7000 Series

Отзывы:

Бренды по названию

Популярные бренды

Omron ZW-7000 Series, Руководство пользователя

Результаты поиска

Содержание ZW-7000 Series

Отзывы:

Бренды по названию

Популярные бренды