![background image](http://html1.mh-extra.com/html/omron/zuv-series/zuv-series_user-manual_743261089.webp)
4-21
ZUV
User’s Manual
Section 4
CONNECTING TO EXTERNAL DEVICES
Section 4
Connection by USB/RS-232C
SYSLOAD/SYSSAVE commands
System data is loaded by the SYSLOAD command and saved by the SYSSAVE
command. Confirm the [READY] response after the command is sent to perform file
send/receive operations using the tools provided by the personal computer, (for
example, from Hyper Terminal) by XMODEM. The [OK] response is returned upon
successful completion of send/receive.
The language setting cannot be loaded by the SYSLOAD command.
(1)
Parameter description
No parameters are provided for the SYSLOAD and SYSSAVE commands.
(2)
Command/response examples
The following shows an example of this command:
The following shows an example of a response to this command:
• SYSLOAD
• SYSSAVE
OK
SYSLOAD <Delimiter>
←
The system data is loaded.
SYSSAVE <Delimiter>
←
The system data is saved.
OK <Delimiter>
←
Command execution ends successfully.
Command
Delimiter
Delimiter
Delimiter
Delimiter
Response
Delimiter
Delimiter
Содержание ZUV Series
